NEED HELP? Chat with us online or call (317) 286-3573

PowerFlo® Lift Pump for 2011-2016 LML Duramax (Short Bed)

$799.00
In stock
SKU
FPE-34563

The PowerFlo* lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! The LML when delivered from the factory relies on vacuum from the CP4 to draw fuel from the tank, this puts extra stress on the injection pump and can lead to premature failure.  The PowerFlo lift pump provides positive fuel pressure to the CP4, decreasing strain on the injection pump and supporting up to 800 hp. 

Features

Direct OEM In-Tank Replacement:

The PowerFlo Lift Pump retains the factory fuel lines and installs in less than half the time of other high flow lift pumps. 

OEM Quality - Dual Gerotor: 

Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and increased reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations. 

Seamless Integration:

The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. 

Aftermarket Capable: 

Want the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters?  The pump outlet and return is threaded to accept a -8 O-ring fitting (3/4"-16 thread). 

 

Cross-reference

 PowerFlo P/N   Fitment        GM/Chevy P/N 
  FPE-34563   Short Bed (6.5')   13578389 & 13578388 
  FPE-34564  Long Bed (8')  13578389 & 13578388

 

Application Notes

We recommend the use of our Auxiliary Heated Fuel Filter Kit, P/N FPE-DMAX-HFFBA-1116 in conjunction with our PowerFlo Lift Pump. The filter kit replaces the factory fuel filter housing with a new filter base, integral high-flow fuel heater, Water-In-Fuel (WIF) sensor, and Donaldson spin-on canister style filter. Our updated fuel filter base mounts in the factory location, providing for a direct factory replacement and the peace of mind to tackle the coldest of days with a high-flow fuel heater.

 

PowerFlo Operating Pressure: 10-13 psi at idle

* For use with single fuel tank configurations only

** For use on pickup style trucks only - for cab & chassis verify your pump P/N to the cross-reference table.

*** For fitment/use in Titan Fuel Tanks, reference our Fitment Data.  This pump will not fit S&B fuel tanks. 

 

*Protected under US Patent No. D910,081 and US Trademark Reg. No. 6,878,860

 

  • 2011 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
  • 2012 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
  • 2013 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
  • 2014 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
  • 2015 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
  • 2016 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
Write Your Own Review
You're reviewing:PowerFlo® Lift Pump for 2011-2016 LML Duramax (Short Bed)

Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

IMPORTANT: We will not be shipping product between the dates of July 5th and July 11th. All orders will be processed and shipped the week of July 12th.

While we are closed take advantage of 5% off MSRP!

© 2023 Fleece Performance Engineering, Inc. All Rights Reserved.