Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

Welcome to Fleece Performance!

Call Today 317-286-3573


  E-mail Subscribe

More Views

2013-2018 2nd Gen Swap Kit & S400 Turbocharger for 4th Gen Cummins

Quick Overview

2nd Gen Swap Kit for 4th Gen Cummins (2013-2018)

Availability: In stock

$3,230.33

* Required Fields

$3,230.33

Details

This kit from Fleece Performance Engineering is referred as a “2nd Gen Swap” due to the turbo relocating from the back of the manifold to the same location as the 2nd Generation Dodge (1998.5-2002) turbo location. In other words, the swap kit locates the turbo in the center of the manifold with the outlet flange angled down. The major benefit for 2003+ Common Rail Cummins trucks is the use of a divided manifold. Capitalizing on the individual cylinder impulses in a divided manifold greatly increases spool up and driving characteristics with a properly matched turbo.  

This kit is designed to be used with an S400 turbocharger with a 5" compressor cover inlet, 4.2" OD compressor cover discharge, 4.625" OD turbine housing discharge, and T4 turbine housing foot. It is also designed to be used with a 2nd Gen T4 Steed Speed or ATS Cast Manifold with the outlet flange angled down.

Kit contents include:

Turbo selection (S463/83 or S467/83)
T4 Divided Turbine Flange Gasket
Short Stud Kit
2003+ Cummins Turbo Oil Feed Line Kit for S300 and S400 Turbos in 2nd Gen Location
Cummins Turbo Drain Tube Adapter
-10 to 7/8"-14 Straight Male Black w/ O-Ring (FPE-78-14-10AN)
Turbo Drain Flange Adapter (7/8-14 o-ring)
(2) 3/8"-16x1" Flange Head Bolt
(2) M10-1.5x25mm Flange Head Bolt
(2) M8 × 1.25 Flange Head for Turbo Drain Kits
-10 Braided Steel Cummins Turbo Drain Tube
16MM Metric Port Plug Allen Head (Cummins Coolant Bypass Plug for Automatic Kits)
18MM Metric Port Plug Allen Head
Rubber Elbow 5" ID X 45 Degree
Intake Elbow with MAF/IAT Bung (Molded)
Fleece Performance Custom Air Filter for 2nd Gen Kit
(2) Breeze T-Bolt Clamp 3.00" w/ Plate Bolt
(2) Breeze T-Bolt Clamp 5.25" w/ Plate Bolt
Flat-V Flanged 2nd Gen Downpipe with Clamps
2013-2016 Cummins 2nd Gen Kit CAC Pipe
2003+ Cummins Exhaust Manifold Gasket Set
S400 VBand Compressor Outlet Clamp
O-ring for 90° Turbo Compressor Discharge Adapter
(4) Breeze Mini Hose Clamp SAE 8 w/ Plated Hex Screw
4ft 5/8" Heater Hose
2ft 3/4" Thermasheild
Tee Connector - 5/8" (15.9 mm)
Cummins 68RFE Transmission Dipstick Tube Bracket
4th Gen Cummins Coolant Riser Delete (-10AN)
-10 90deg to Hose Barb Black
2013-2016 6.7L Cummins A/C Line Reroute Kit

IMPORTANT NOTES: 

  • Kits are available with or without a standard T4 Steed Speed Manifold. 
  • This kit has the option for the addition of a Fleece Performance coolant tank. If using your factory coolant tank, you must use a turbo blanket to shield the coolant tank from the turbo exhaust housing heat. 

 


 

Turbo Options - Click on the links to read about the turbo options:

 

  


 

 Check out the installation of our 2nd Gen Kit on Truck Tech, courtesy of PowerNation TV: 

   


 

Prop 65WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov 

 

 

Additional Information

Ships In Orders are built to suit and generally ship in 5-7 Days.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.