works great in my truck boosted the psi from like 2 to 15 instantly improved mpgs and horsepower
05 dodge ram 2500
may cost little more but with lifetime warranty I would definitely purchase again

great pump. super easy to install. sounds strong right off the bat, turn your key and you can audibly here it until your trucks turned on. definitely feel a difference. no pump hanging off the side. great choice

If your on the fence between buying a frame mounted pump or a fleece in tank pump, go with the fleece. Clean, Simple install, no drilling holes in your tank or having to route hoses. I also installed the Mopar / GB Remanufacturing - Severe Duty Fuel Filtration Kit 522-050 , for 03-12 Dodge Ram Trucks with a 5.9L or 6.7L Cummins. Excellent Fuel Supply now and Excellent Fuel filtration, its a win win. The two go together seamlessly and the fuel filtration kit has a extra WIF water in fuel sensor and fuel heater that works with your existing OEM system. Perfect combo for our 05-09 Dodge Ram Cummins .

Great pump installs easy The biggest changed I noticed is after draining and replacing the filter I only need 2 key cycles to start the engine. The stock pump was over ten and still hard starting. It’s a no brainer if your under 800 hp buy this then the fuel pump is out of sight out mind

Great pump installs easy The biggest changed I noticed is after draining and replacing the filter I only need 2 key cycles to start the engine. The stock pump was over ten and still hard starting. It’s a no brainer if your under 800 hp buy this then the fuel pump is out of sight out mind

Have been installed about 1 month and really love it. So much easier to install than others with pumps you need to install outside of frame rails.

Great product, great quality. The installation was pretty easy, took about 4 hours ish by myself. Toughest part was getting the locking ring on.

Finally installed the pump this past weekend. So far i'm very impressed with the setup I currently have on my 2007 Dodge Ram 3500 5.9 single cab dually six speed manual with a G56. The truck only has external bolt on parts. The Fleece pump sounds stronger than the stock pump from idle. I've never been able to bark the tires in second, third and fourth gear in dry conditions until after the fleece pump install. Next purchase will be upgraded injectors to maximize the pumps potential.
-62mm modified Holset turbo with billet wheel
-AFE stage 2 cold air intake
-3.5 inch intake horn
-5inch Magnaflow exhaust with a muffler
-Rhinopac dual disc 750hp clutch
-Edge Performance Products CTS2 LCD programmer
Thanks please. Great product.